There are now twelve<\/strong>\u00a0episodes in the NoiseMap series.\u00a0 These short videos, hosted on YouTube, talk you through the steps involved in creating a noise model from a simple sketch of a housing scheme alongside a road, calculating results and designing a noise barrier.\u00a0 More episodes will follow.<\/p>\n Episode 1<\/a> – import a sketch into NoiseMap and to model a road. Episode 1 – Introduction to Open Site Noise<\/a><\/p>\n Overview of NoiseMap five<\/a><\/p>\n Introduction to NoiseMap five<\/a><\/p>\n NoiseMap – Viewing Results<\/a><\/p>\n NoiseMap 3-D viewer<\/a><\/p>\n <\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":" New series of video guides There are now twelve\u00a0episodes in the NoiseMap series.\u00a0 These short videos, hosted on YouTube, talk you through the steps involved in creating a noise model from a simple sketch of a housing scheme alongside a road, calculating results and designing a noise barrier.\u00a0 More episodes will follow. Episode 1 – … Continue reading Video guides<\/span>
\nEpisode 2<\/a> – put housing into the model and to enter receiver points.
\nEpisode 3<\/a> – calculate noise levels at a receiver point.
\nEpisode 4<\/a> – calculate noise contours.
\nEpisode 5<\/a> – describes Categories and Combinations
\nEpisode 6<\/a> – processing noise contours
\nEpisode 7<\/a> – add a noise barrier & design it to achieve a target level
\nEpisode 8<\/a> – using NoiseMap to optimise a noise barrier
\nEpisode 9<\/a> – use a noise measurement to calibrate a noise model and create noise contours
\nEpisode 10<\/a> – create and use a 3-D view of your model and results
\nEpisode 11<\/a> –\u00a0 create 3-D views of noise models
\nEpisode 12 – understanding object labelling<\/a><\/p>\nSeason 2 – Modelling Construction and Open Sites<\/h5>\n
Previous Video Guides<\/h5>\n